12
4.5 - Header buttons
Home Main MenuPrevious screen System Menu Login Menu Start / Stop Alarms Menu
Button Description
Home screen: Press the button to go to the Home screen.
Previous screen: Press the button to go back to the previous screen.
Main menu: Press the button to go to the Main menu.
System menu: Press the button to go to the System menu.
Login menu: Used to log in to the controller in order to access higher conguration level.
User is not logged in. Service technician access level.
User access level. Factory access level.
Start/Stop menu: Used to control the unit control mode.
Unit is currently stopped (blue icon).
Unit is currently running (green icon).
Alarms menu: Press the button to go to the Alarms menu.
The grey bell means there is currently no alarm active on the unit.
The yellow ringing bell means that there is a partial alarm (one circuit aected by the alarm) or Alert (no action
taken on the unit).
The red ringing bell means that the unit is aected by the alarm.
4.6 - Subheader buttons
Button * Description
Circuit view: Press the button to go to the circuit view.
Green lights in the corners of the circuit icon mean the circuit is currently running.
Grey lights in the corners of the circuit icon mean the circuit is currently stopped.
* Please note that the letter inside the circuit icon stands for the circuit, i.e. “A” stands for circuit A.
4 - USER INTERFACE: OVERVIEW
To Next Page
Loading...
