Carrier SmartVu - Page 32

32
ALMHIST2 – Major Alarm Historic
No. Name Date Hour Alarm text
1 Alarm YYYY/MM/DD HH:MM Alarm text (see section 8.6)
... Alarm YYYY/MM/DD HH:MM Alarm text (see section 8.6)
50 Alarm YYYY/MM/DD HH:MM Alarm text (see section 8.6)
*Depends on the selected language (English by default).
ALARMRST – Reset Alarms
No. Name Status Displayed text* Description
1 RST_ALM no/yes Alarm Reset Used to reset active alarms
2 ALM - Alarm State
Alarm state:
Normal = No alarm
Partial = There is an alarm, but the unit continues to operate
Shutdown = Unit shuts down
3 alarm_1c - Current Alarm 1 Alarm code (see section 8.6)
4 alarm_2c - Current Alarm 2 Alarm code (see section 8.6)
5 alarm_3c - Current Alarm 3 Alarm code (see section 8.6)
6 alarm_4c - Current Alarm 4 Alarm code (see section 8.6)
7 alarm_5c - Current Alarm 5 Alarm code (see section 8.6)
8 alarm_1 - Jbus Current Alarm 1 JBus alarm code (see section 8.6)
9 alarm_2 - Jbus Current Alarm 2 JBus alarm code (see section 8.6)
10 alarm_3 - Jbus Current Alarm 3 JBus alarm code (see section 8.6)
11 alarm_4 - Jbus Current Alarm 4 JBus alarm code (see section 8.6)
12 alarm_5 - Jbus Current Alarm 5 JBus alarm code (see section 8.6)
*Depends on the selected language (English by default).
IMPORTANT: JBus vs. Modbus: Data exchange services
oered by Modbus and JBus protocols are the same and
therefore these terms can be used interchangeably.
5 - USER INTERFACE: MENU STRUCTURE