CARVIN TRx Series - User Manual

TRx3210 Line Array
Turnkey Systems
User Manual
c
Made in USA
76-03210D 091212

Summary

TRx3210 System Specifications

Frequency Response Characteristics

Crossover Frequencies and Impedances

Stacking and Flying Procedures

Rigging System Overview and Safety

Introduction to rigging systems and critical safety precautions.

Secondary Safeties and Inspection

Requirements for secondary safety lines and regular rigging inspections.

Assembling a Line Array

Installing SureFlyTRx Rigging Kit

Procedure for attaching the SureFlyTRx rigging hardware to enclosures.

Attaching the T-Bar

Steps for connecting the T-bar to the top array enclosure.

Array Assembly - Shackle and Additional Enclosures

Installing the Shackle for Hanging

How to attach the rated shackle for vertical suspension.

Adding Subsequent Array Modules

Array Assembly - Pin Storage and Angle Setup

Setting 0 Degree Vertical Angle

Adjusting Array Angles for Curvature

Creating J-Curve with Pin Positions

T-Bar Hang Points and Array Tilt Adjustment

Full Range and Bi-Amp Configuration

Bi-Amp Mode Selection Switch

How to activate bi-amp mode using the concealed switch.

Bi-Amp Wiring Diagram

Pin Flip Switch for Full-Range Wiring

Full-Range Passive Hook-up with Pin Flip

Full-Range Passive Wiring Examples

Speaker Management Processor Settings

Stereo Passive 2 Array Module Settings

Processor settings for passive stereo configurations with two array modules.

Stereo Bi-Amp 4 Array Module Settings

Processor settings for bi-amped stereo configurations with four array modules.

Passive 4 Array Module Curve Array Settings

Bi-Amp 8 Array Module Straight Hang Settings

Carvin Product Warranty Information

Warranty Coverage and Eligibility

Details on who is protected by the warranty and purchase requirements.

Warranty Claims and Service Procedures

Information on making claims and obtaining warranty service.

CARVIN TRx Series Specifications