20
2-3. Rear Panel Descriptions
CI-200A, CI-201A
SEALING
(CAL S/W)
Use it to set the weight (calibration).
POWER
* Use it for the power supply.
LOAD CELL
A port to connect load cell.
RS-232C
Serial Com 1 and Com 2 port (connect PC or printer)
F/G
It is a terminal for grounding to improve electric noises, which is connected to
the grounding line upon any abnormalities in the product.
(If the grounding terminal of the product is not connected, it might cause
failures.)
To Next Page
Loading...
