CAS CI-200 Series - 4. Weight Setup (Calibration) Mode; What is Weight Setup?; Accessing Weight Setup Mode; 4-1. Weight Setup Menu (CAL1 - CAL9)

23
4. Weight Setup (Calibration) Mode
What is the weight setup?
It refers to the calibration to set the displayed value to the actual weight in displaying weights.
How to Access to the Weight Setup Mode
Turn on the power supply to access to the weight setup mode while pressing Cal S/W after
removing the sealing. Press the setup key long in the weight setup mode to return to the
weighing mode.
4-1. Weight Setup Menu (CAL1 – CAL9)
CAL 1: Maximum capacity
CAL 2: Minimum division and decimal position setting
CAL 3: Weight calibration
3-1. Setting the range of multiple calibration
3-2. Zero calibration
3-3. Setting weight
3-4. Span calibration
CAL 7: Gravity adjustment
CAL 8: Zero adjustment
CAL 9: Factor calibration
CAL 10: Setting dual range