53
6. Test Mode
6-1. How to Enter the Test Mode
Test mode starts when the power is turned on while pressing key in the front
of the indicator.
Press the number for the test menu as you wish.
To enter the weighing mode during test, press
key for a long time.
6-2. Test Menu (TEST 1 - TEST10)
Test 1: Key test
Test 2: Display test
Test 3: Load cell test and A/D conversion test
Test 4: RS-232 serial communication test (COM1, COM2)
Test 5: Printer test
Test 8: EEPROM test
Test 9: Battery test
Test 10: Clock (RTC) test
To Next Page
Loading...
