CAS CI-200 Series - 9-6. Hold Function (LCD)

70
9-6. Hold Function (used for weighing moving objects) - LCD
■ Ordinary Hold Function (hold function is performed when the hold key is pressed.)
Put an object on the load tray. Press the hold key. Hold message is
displayed for a second.
The hold weight is calculated
for about 3~5 seconds.
The hold weight is displayed.
It returns to the normal status and the hold lamp is turned off
if you empty the load tray or press the hold key to release the held
weight value.
■ Automatic hold function (the hold function is performed by automatically calculating
the maximum weight of moving objects.)
Empty the load tray. The weight on the load tray is
displayed.
The maximum value is
displayed with 'HOLD'.
■ It returns to the normal status and the hold lamp is turned off if you empty the load tray
or press the hold key to release the held weight value.
※ Note. The hold function carries out operations according to the set value of F10.