6. Weighing Mode
6-1. Zero function
Display Part or Used Keys
Load
Plate
Description
Step 1 Empty State with zero changed
Step 2
Push the zero key
Step 3 Empty
State after performing zero
function.
Namely, the current weight
is designated as '0'kg.
Note 1. Operating range for the zero key is possible between ±1% ~±99% of the maximum
weight.
Operating range for the zero key is designated in Menu No. [2-1-16].
Note 2. Menu No. [2-1-14] designates whether to perform zero function only if the current
weight is stabilized or even when it is unstable.
3
To Next Page
Loading...
