19
8-2. Auto Print
① To use auto print function, you have to set printer menu to “Pr AUt” in setup mode.
Refer to Setup Mode Table on page 20.
② If the weight is stable, it is printed out automatically.
And You can print out data every time pressing the PRINT key.
8-3. Stream Print
To use auto print function, you have to set printer menu to “Pr Str” in setup mode.①
Refer to Setup Mode Table on page 20.
If the weight is stable, it is printed out continuously②
9. Battery Charge
■ Warning massage is shown when the battery voltage is very low. ( )
■ At this time, charge the battery. (a charging battery only)
■ The display will show a red lamp and the battery will begin a fast charge
automatically.
- Use only the ac adapter which comes with the scale. Other AC adapter may
cause damege.
10. Unit conversion (kg, lb, oz)
① Press the MODE key until
the display shows “U kg” or
your last unit.
②Use “HOLD key” or
“PRINT key” you can set which
unit you want to use.kg, lb, oz.
③Press “SET key” and
“CHAnGE” will display.
④Press the “MODE” key to go
to the weighing mode.
※ Tare, Unstable, when the display weight is not 0 when change is not working.
Leave the platter empty, and weighing is at Zero and stable, the scale should work.
To Next Page
Loading...
Need help?
General
