22
3. How to Enter Date
① Press the MODE key until
the display shows “dy ON”. It
means that date is printed out.
②If you do not want to print out date, press the HOLD(▲) key.
③ Press the SAMPLE( ) key,▶
the display shows
“00,00,00”.
④ Press the HOLD(▲) or
PRINT(▼) key to have
number up or down. To enter
next digit, press the
SAMPLE( ) key.▶
⑤ Press the SET key to save.
“dysave” is shown on the
display and then the display
shows a day of the week. If you
set up a day of the week wrong,
“dy err” is shown on the display
⑥ You can change the day by
pressing the HOLD(▲) or
PRINT(▼) key. If you set up
a day of the week wrong,
“Wk err” is shown on the display.
⑦Press the SET key to save.
“Wksave” is shown on the
display.
⑧If you do not want to save,
press the ZERO key.
To Next Page
Loading...
Need help?
General
