15 Installing Options
56
15.1 Installing the Network Memory Card
ure t is OFF and t ged
e
.
B. Lay the keyboard face dow
3.Plug the Network Card into connectors J that all of the pins are
aligned properly and th nect
4.Attach the 2 Ne
5.Reassemble in reverse order.
15.2 Installing the Paper Cutter
1. Please m un
2. Make sure that the Main Power switch
3. Set the Print Head to its locked-down
4. Remove the 2 front screws on the TPH
5. Attach the paper Cutter with the 2 fro
1. Make s he power switch he scale is unplug
2. Remove th keyboard:
A. The 2 keyboard screws on top of the upper case
n.
5 & J6 on the Main PCB. Make sure
at the 2x9 con
grounding screws to the
or is facing to the rear of the scale.
tw Do not over tighten. ork Card PCB.
ake sure not to scrape the dersurface of the Print Head at all times.
is OFF & that the scale is unplugged.
position.
Bracket.
nt screws.
To Next Page
Loading...
