CAS NT-201A - Gross; Net Key; Key Board; Tare Key; Zero Key

- 10 -
Key Board
Used to enter setting value in TEST, CAL, and SET mode instead of
Numeric keys
▲
Increase setting value of first digit by one
▼
decrease setting value of first digit by one
◀
Moves one digit to left
Reset the Current Value
ZERO KEY
Used to remove small variations in the indicator’s zero
If pressed for 2~3 sec, you can go to SYSTEM Mode
TARE KEY
Used to weigh an item by using the container
Current weight is memorized as tare weight
If pressed in unload condition, tare setting is released
If pressed for 2~3 sec, you can go to KeyTare Mode
When you know the tare weight, you can enter the tare weight
GROSS / NET KEY
It means NET lamp is on for Net & off for Gross weight
If pressed for 2~3sec, you can see "On" and input Product ID
If pressed for 2~3 sec, you can
" CodE=Z lim=t " . Then you
can Input Product ID with ZERO,
Limit value with TARE key.
PRINT KEY
If you print, current weight is added to total weight