CAS NT-201A - Com1 (Rs-232) Use; Com1 Transmission Method; Device ID

- 35 -
Menu Description Menu Description
D01
Device ID D08 Automatic print
D02
COM1(RS-232) use D09 Line feed
D03
COM1 transmission method D10 Select print format
D04
COM1/2 Baud rate D11 Select date print format
D05
COM2 (RS-422) use D12 Select Product ID print
D06
COM2 transmission method D13 Select user’s message print
D07
Printer type D14 Set the current clock
DEVICE ID
KEY FUNCTION DISPLAY VAL. DESCRIPTION
01: ID=0, 99: ID=99
00
If you use a system, you can iden-
Increase or
decrease
set value
~
tify each indicator by this device ID
99
If you set it to 00, there is no trans-
mission response cause 00 means
ENTER
Save &
Go to d02
d01
that is no device
UNIT Save & Exit Save & go to Normal Mode
COM1 (RS-232) USE
KEY FUNCTION DISPLAY VAL. DESCRIPTION
0
Do not use COM1
Select 0 ~ 3
1
CAS Protocol (22 bytes)
2
Limit Protocol (22 bytes)
ENTER
Save &
Go to d03
d02
3
Printer Mode
UNIT Save & Exit Save & go to Normal Mode
COM1 TRANSMISSION METHOD
KEY FUNCTION DISPLAY VAL. DESCRIPTION
Select 0 ~ 3
0
No data output