CAS NT-201A - How to use (Weighing Mode Only)

- 39 -
Select 0 ~ 1
0
Do not print the user’s message
ENTER
Save &
Go to d14
d13
1
Print the user’s message
UNIT Save & Exit Save & go to Normal Mode
Note 1. How to input the format of user’s message print is explained chapter 14
CAS & Command Mode Protocol in detail.
SELECT CLOCK
KEY FUNCTION DISPLAY VAL. DESCRIPTION
Select 0 ~ 1
0
Do not use clock
ENTER Go to next
d14
1
Use clock
Change date / time (Ex. 2004.08.31 14:28:47) [d14 = 1]
KEY FUNCTION DISPLAY DESCRIPTION
C1 : 04 Year : 2004
Increase or
decrease
C2 : 08 Month : 08
C3 : 31 Day : 31
Shift to one
digit to left
C4 : 14 Hour : 14
C5 : 28 Minute : 28
ENTER
Save & go to
weighing mode
C6 : 47 Second : 47
UNIT Save & Exit Save & go to Normal Mode
Note 1. Although key clock is set after setting the value of d14 to 1,
the value of d14(1) is not saved. Always the value of d14 is started to 0.
12. How to use