CAS NT-580A - Page 35

36
Ref 1. Command Mode Table
Command data to NT-580A
0 1 2 3 4 5 6 7 8 9 10 11
Command description NT-580A Respond
D ID K Z CR LF ZERO key
D ID K T CR LF TARE key Return the received
D ID K G CR LF GROSS key Return the received
D ID K N CR LF NET key Return the received
D ID K S CR LF START key Return the received
D ID K P CR LF STOP key Return the received
D ID K B CR LF Print key Return the received
D ID K C CR LF Total print key Return the received
D ID K W CR LF Request weight data Return the received
D ID H T CR LF Request set point value Send Format 2
D ID H C 0 0 0 0 0 CR LF
Request pertinent set point
value to Set code
Send Format2
D ID H Z 0 0 0 0 0 CR LF Zero band Return the received
D ID H O 0 0 0 0 0 CR LF Optional preliminary weight Return the received
D ID H P 0 0 0 0 0 CR LF Preliminary Return the received
D ID H F 0 0 0 0 0 CR LF Final value Return the received
D ID H R 0 0 0 0 0 CR LF Free fall value Return the received
D ID H I 0 0 0 0 0 CR LF High limit value Return the received
D ID H L 0 0 0 0 0 CR LF Low limit value Return the received
D ID H E 0 0 0 0 0 CR LF Set point code(00-99) Return the received
(D, ID:00~99, CR : 0×13, LF: 0×10, Command HC, HE range = 00 ~ 99)
* Format 1 : PC send set point all data to indicator NT-580A
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
D ID H A Set point code , Zero Band , Optional-
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39
Preli , Preliminary , Final value , Free Fall
40 41 42 43 44 45 46 47 48 49 50 51 52 53
, High limit , Low limit CR LF
* Format 2 : Recieve the request data from PC then response of Indicator
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
D ID H T Set point code , Zero Band , Optional-
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39
Preli , Preliminary , Final value , Free Fall
40 41 42 43 44 45 46 47 48 49 50 51 52 53
,
High limit
,
Low limit
CR LF
* Please input without the decimal point.