CAS NT-580A - Serial Interface

33
5-3-2. Serial Interface
F26
Function Device ID
VFD Display DESCRIPTION
F26 00
Device ID = 00
Set Value
(00 ~ 99)
F26 99 Device ID = 99
Ref 1 . It is used as the proper ID of the indicator in the Command Mode.
F27
Function Set of Parity Bit ( Parity Bit- COM1 & COM2)
VFD Display DESCRIPTION
F27 0
Data bit 8, Stop bit 1, Parity bit : None
F27 1 Data bit 7, Stop bit 1, Parity bit : even
Set Value
(0 ~ 2)
F27 2 Data bit 7, Stop bit 1, Parity bit : odd
Ref 1. The NT-580A supplies two serial interfaces(COM1, COM2).
F26 and F27 is applied to two serial interfaces in common.