CAS NT-580A - BCD out(Option) Test; Analog out (Option) Test

49
Test 7
Function : BCD Out Test(Option-3)
Use Key DISPLAY DESCRIPTION
TEST 7
It means the Test Mode 7.
ALL on
ALL on : all BCD output on
▲ : Turn on key
▼ : Turn off key
*, ENTER : Select menu
Shift Mode
ALL oFF
ALL oFF : all BCD output off.
Ref 1. You can not separately Test each line of BCD OUT in Test 7 but can check the whole operation.
Ref 2. Check the setting of the option card in Test.
Test 8
Function : Analog Out Test(Option-4, 5)
Use Key DISPLAY DESCRIPTION
TEST 8
It means the Test Mode 8
L 04000
Set the value of zero output to 4.00mA
H 20000
Set the value of high output to 20.00mA
HiGH
HiGH : Output the value of maximum weight.
(Adjust to 20mA / 10V)
: ◀ Zero value setting
: ▶ High value setting
▼ : Zero output value Test
(4mA / 0V)
▲ : High Output value Test
(20mA / 10V)
*, ENTER : Select menu
Shift Mode
Zero
Zero : Output the zero value
(Adjust to 4mA / 0V)
Ref 1. You can Test by designating the operation range.
Ref 2. Check the setting of the option card in the Test.