— 11 —
Make sure the unit lowers securely into the cradle as far as it can go.
To remove the CASSIOPEIA from the cradle
Pull up on the unit so the recess on its back disengages from the raised part of the cradle, and then lift the unit
straight up from the cradle.
22
11
4. Taking care to align the serial connector on the bottom of the unit with the connector on the cradle, lower the
unit into the cradle as shown in the illustration below.
USB device
Computer
CASSIOPEIA
USB-A connector
Cradle
To connect another USB device to the cradle
The cradle is equipped with a USB-A connector that can be used to connect another USB device, as shown
below.
• When using any USB device, make sure the applicable USB driver on the unit.
To Next Page
Loading...
