116
［System］Tab ［IMGRead］Tab
Tab Item Explanation
Scanner
APO
This filed is to set up a time period in the range of 0 to 1800 (in
second) for the APO function to activate.
Setting “0” will disable the function.
System
Power up
device with
trigger key
This checkbox is to set “Turning ON the terminal with the Trigger
key” effect.With a check mark in the checkbox, the power on the
terminal can be turned on when one of the Trigger keys is pressed
down.
Timeout
This field is to set up a time period for the Timeout to activate in
scanning operation.Scanning terminates either when the Trigger
key is released or when the time period in milliseconds set in this
field elapses.
Add Suffix
This field is to specify a suffix that is appended at the end of each
decoded data.
Indicator
These two checkboxes are to set scanning completion notification
method with either LED or sound or both.
Notification method with a check mark in the checkbox will activate
when scanning a symbol is complete.
IMGRead
Output
These two radio buttons are to specify an output method for
decoded bar code data selecting either one of the buttons.
To Next Page
Loading...
Need help?
General