66
SHOOTING A SNAPSHOT
Turning Off the AF Assist Lamp
The AF assist lamp emits light that helps the camera focus when
you half-press the shutter button under dark lighting conditions.
The AF assist lamp does not light when lighting is bright.
The initial factory default setting is
AF assist lamp on.
Turning off the AF assist lamp
using the following procedure is
recommended when shooting the
image of a nearby person.
1. In the REC mode, press [MENU].
2. On the “REC” tab, select “AF Assist Light”
and then press [X].
3. Use [S] and [T] to select “Off” and then press
[SET].
When you want to turn on the AF assist lamp, select “On”
here.
IMPORTANT!
• Do not look directly into the AF assist/self-timer lamp or
point it directly at a person’s eyes.
AF Assist/Self-timer Lamp
To Next Page
Loading...
