78
SHOOTING A SNAPSHOT
Your camera has four continuous shutter modes.
Selecting the Continuous Shutter Mode
1.
In the REC mode, press [MENU].
2. On the “REC” tab, select “Continuous” and
then press [X].
3. Use [S] and [T] to select the mode you want
and then press [SET].
This enables the continuous shutter mode you selected and
displays its icon on the monitor screen.
To turn off continuous shutter, select “Off”.
Using Continuous Shutter
Continuous
Shutter Mode
Description
Normal Speed
(Normal-speed
Continuous Shutter)
Continually records images until
memory becomes full.
High Speed
(High-speed
Continuous Shutter)
Continually records images at a speed
that is faster than Normal-speed
Continuous Shutter, until memory
becomes full. Image size is fixed at 2M
(1600 × 1200 pixels).
Flash Cont.
(Flash Continuous
Shutter)
Use this mode to record up to three
consecutive images, firing the flash for
each one.
Zoom Cont.
(Zoom Continuous
Shutter)
In this mode, you select an area on the
monitor screen with a selection
boundary. Then when you press the
shutter button, the camera records the
monitor screen image and the area
enclosed in the selection boundary,
digitally zoomed to twice its normal size.
To Next Page
Loading...
Need help?
General
