219
A-GPS function setting
If your using SIM Card contract with telephone company is supported A-GPS function, you can set
A-GPS setting as below. (About setting detail, please follow telephone company indications.)
i IT-G500 and the PC, connected with a USB cable.
ii In the following folder of IT-G500, it will create a new agpscfg.ini.
"FlashDisk -> System Settings -> agpscfg.ini"
descriptive content of agpscfg.ini are as follows.
Setting detail
[GPS]
SettingEditor=1 <= Change this value from 0 to 1
The following setting tab menu will be appeared after execute GPS information program.
To Next Page
Loading...
