32 Menu operation
Advanced
(Continued)
• Color Temperature
There are several preset color temperature settings available. The available
settings may vary according to the signal type selected.
• Normal: Maintains normal colorings for white.
• Cool: Makes images appear bluish white.
• Warm: Makes images appear reddish white.
You can also set a preferred color temperature by adjusting the following
options.
• Red Gain/Green Gain/Blue Gain: Adjusts the contrast levels of Red,
Green, and Blue.
• Red Offset/Green Offset/Blue Offset: Adjusts the brightness levels of
Red, Green, and Blue.
• 3D Color Management
The Color Management provides six sets (RGBCMY) of colors to be
adjusted. When you select each color, you can independently adjust its
range and saturation according to your preference.
• Primary Color: Selects a color from among Red, Yellow, Green, Cyan,
Blue, or Magenta.
• Hue: Increase in the range will include colors
consisted of more proportions of its two
adjacent colors. Please refer to the
illustration for how the colors relate to each
other.
For example, if you select Red and set its
range at 0, only pure red in the projected
picture will be selected. Increasing its range
will include red close to yellow and red close
to magenta.
• Gain: Adjusts the values to your preference. The contrast level of the
primary color you select will be affected. Every adjustment made will
reflect to the image immediately.
• Saturation: Adjusts the values to your preference. Every adjustment
made will reflect to the image immediately. For example, if you select
Red and set its value at 0, only the saturation of pure red will be
affected.
Saturation is the amount of that color in a video picture. Lower settings produce less
saturated colors; a setting of “0” removes that color from the image entirely. If the saturation
is too high, that color will be overpowering and unrealistic.
RED
BLUE
GREEN
Yellow
Cyan
Magenta
To Next Page
Loading...
