CBN CH6643E - Verify IP Address in Windows 8; Renew IP Address for Windows; Set Up Wi-Fi Network

Verifying the IP Address in Windows
1. Press the
Windows
prompt” to display the
the screen will appear.
2. Click
Command Prompt
3.
In the Command Prompt,
Configuration
Renewing the IP Address for Windows XP
1. Open a command prompt window.
A. From the Windows taskbar, click
B. Select Run
to open the Run
C. Type cmd
and click
2. Type
ipconfig /renew
indicating that Internet access is available.
3. Type exit
and press
If,
after performing this procedure, your computer still cannot access the Internet,
call your service provider.
Setting Up a Wi-
Fi Network
Do the following to set up a Wi
1. Power on the
CH6643
2.
Power on the WPS
such as a PC, router, or telephone.
The Wi-
Fi network will automatically detect the WPS devices.
3. Press WPS
button on the
4. If applicable,
press
Verifying the IP Address in Windows
8
Windows
key
on your keyboard and then enter “command
prompt” to display the
Command Prompt shortcut.
A search box on right side of
the screen will appear.
Command Prompt
In the Command Prompt,
Type ipconfig and press
Enter
Renewing the IP Address for Windows XP
, Windows 7& Windows 8
1. Open a command prompt window.
A. From the Windows taskbar, click
Start.
to open the Run
window.
and click
OK
to open a command prompt window.
ipconfig /renew
and press Enter
. A valid IP address should appear
indicating that Internet access is available.
and press
Enter
to close the command prompt window.
after performing this procedure, your computer still cannot access the Internet,
call your service provider.
Fi Network
Do the following to set up a Wi
-
Fi network using the WPS button on the
CH6643
E.
Power on the WPS
-
enabled devices you want to have access to the network,
such as a PC, router, or telephone.
Fi network will automatically detect the WPS devices.
button on the
CH6643E.
press
WPS button on the other WPS devices.
18
on your keyboard and then enter “command
A search box on right side of
Enter
to display the IP
to open a command prompt window.
. A valid IP address should appear
to close the command prompt window.
after performing this procedure, your computer still cannot access the Internet,
Fi network using the WPS button on the
CH6643E:
enabled devices you want to have access to the network,
Fi network will automatically detect the WPS devices.