Ceia THS/21 - Mechanical Installation

FI002K0021v1100UK – THS/21E and THS/21 Programming Manual
3
PROGRAMMING PARAMETERS
71
3.21 Commands accessible only in Remote Programming
-
Remote Possible settings Standard setting Parameter
PE
- -
Global
Description Models
Exit from remote programming
Type this command to exit from the Remote Programming.
If RPTO=ON, the Metal Detector exit automatically from the Remote Programming in case of 5
minutes of programming inactivity.
All models
-
Remote Possible settings Standard setting Parameter
PV
- -
Global
Description Models
Software version
All models
Provides the software version loaded on the
Metal Detector.
#PV <ENTER>
THS/21 V5.330 - ALM V5.260
-
Remote Possible settings Standard setting Parameter
HE
- -
Global
Description Models
Help
Provides the list of all available parameters, their meanings and their current settings
All models
-
Remote Possible settings Standard setting Parameter
DA
DD/MM/YY -
Global
Description Models
Current date insertion
All models
DD = Day, MM = Month
YY = last two figures of the year
#DA 04/03/11 <ENTER>
#
-
Remote Possible settings Standard setting Parameter
AR
- -
Global
Description Models
Reset total alarm counter
AR command resets the total alarms counter (AC).
All models
-
Remote Possible settings Standard setting Parameter
CR
- -
Related to the
current product
Description Models
Reset of the current product counters
CR command resets both Alarms and Objects counter related to the current product (CA and CO
respectively).
All models
-
Remote Possible settings Standard setting Parameter
OR
- -
Global
Description Models
Reset total pack transit counter
OR command resets the total objects counter (OC).
All models