FI002K0018v1100UK – THS/21 Instruction manual for installation, use and maintenance
3
INSTALLATION
ORIGINAL INSTRUCTIONS 59
3.2.1.4 Moving the Metal Detector
Before you move the detector, check its weight. It could be too heavy to be handled by one person. Use suitable handling
methods and tools. CEIA declines all liability for damages arising from incorrect handling of the container.
Use forklift trucks or sling the load-bearing structure. Ensure that the load is balanced during
movement. Avoid deforming the structure or its component parts.
When transporting and handling the Metal Detector DO NOT pass slings, ropes, forklift forks, hands or any other lifting
equipment through the probe aperture.
Other transport methods are forbidden.
3.2.2 CEIA Integrated Systems
Store the system in its original packaging, or in a way that protects it adequately from atmospheric
agents or other possible causes of damage (moving objects, weights, solvents etc.).
3.2.2.1 Handling and moving the package device
Use a lift truck with a suitable load-bearing capacity. The
total weight of the package is marked on the package.
Packed integrated systems are bulky and
heavy. The centre of gravity of the
packaging is not where it might appear from
the outside of the packaging. To ensure
balanced lifting, insert the forks in the
positions marked on the packing.
Place the equipment, still in its package, as close as possible
to the final installation site.
To Next Page
Loading...
