41Method - Create, Edit and Delete
proportion of each product if there are 2 or more products being blended. The sum of all the propor-
tions must equal 100.00% (50%/50%, 75%/20%/5%, etc).
6.5. If the product has any additional additives (such as added water, salt, spices, etc), these should be
added in the Bias section. Similarly, if after running 3-5 samples there is a consistent bias present
between the ProFat results and the reference results, a bias can be added for that purpose.
CAUTION
Not following proper sample preparation and spread techniques can lead to a reduction in precision,
inaccurate results, or even damage to the system.
WARNING
Improper sample preparation and spread techniques can create an unsafe testing environment due to re
or volatiles in the cavity.
To Next Page
Loading...
Need help?
General
