52 Data Management
Data Management
The SMART 6 is equipped with a variety of options to store and review data. It comes equipped with an internal
database which can store a large number of methods. Each method stores up to 50 results that can be recalled
and analyzed as needed by the user. Data can also be sent to different external databases, including the
proprietary CEM Communicator and LIMS Networks. Furthermore, results can be quickly and easily statistically
analyzed on the SMART 6 to provide average results, standard deviations, and production trends.
SMART 6 Database
The SMART 6 stores up to 50 results per method internally. These results can be accessed from the method
folder or the run screen once an analysis has been completed. Data is separated based on method, and sorted by
the Sample ID assigned to each analysis.
To access past method results from the Home Screen, follow the instructions below.
1. Select the method folder (One Touch or Classic) that contains the method and long press the method.
2. Select the Information Icon.
NOTE
Method results can be accessed from the Run Screen.
3. A list of all samples analyzed with that method will be listed. The top of the list will be a Details tab which con-
tains the method parameters and dates the method was created and last modied.
To Next Page
Loading...
Need help?
General
