54 Data Management
batches or technician shifts.
• Selecting Samples allows the user to select the last samples using that method. This can be helpful for
conrming the statistics on specic projects or validations.
5. After the data range has been set, select the Search icon to access the statistical analyses. The SMART 6 will
include the Average, Minimum result, Maximum Result, Results Range, and Standard Deviation. It will also list
all samples being used to compile the statistical analysis.
6. An SPC (Statistical Process Control) chart can also be created for the data that will be included. Lower and up-
per limits can be set in order to ensure data is between or outside the range of a certain product specication.
To Next Page
Loading...
