CEM SMART System 5 User Manual

53
Note: The method test screen appears indicating
the power, temperature and time.
16. If Autotrack is turned off, a sample identifi-
cation name or number is required. Press
the operation key below ID.
17. Using the operation keys below the arrows,
position the cursor on (select) the first
number or letter of the sample identifi-
cation. Press ENTER. Continue to position
the cursor on each letter or number and
press ENTER until the identification is
complete.
Note: If using an identification number only, use
the numeric keys to enter the number.
18. Press READY to return to the method
screen.
Note: If analyzing only one sample, proceed to
step 29.
19. For multiple samples, press the operation
key below SAMPLE.
Note: Press the operation key below VOLUME
to edit the sample volume.
20. Using the numeric keys, enter the number
of samples to be analyzed.
21. Press ENTER.
XXXXXX
Power: xxx %
Temp (xxx): xx.x
Time: xx:xx
Volume: xxx
Sample: x
Wt: x.xxxxg
Place filter on balance and
press TARE.
ID VOLUME SAMPLE
SAMPLE ID:
0 1 2 3 4 5 6 7 8 9 A B
C D E F G H I J K L M N
O P Q R S T U V W X Y Z
Space Delete
Highlight choice, press ENTER.
Press READY to continue.
➞
➞
➞
➞
XXXXXX
Sample ID: SAMPLE xx
Power: xxx %
Temp (xxx): xx.x
Time: xx:xx
Volume: xxx
Sample: x
Wt: x.xxxxg
Place filter on balance and
press TARE.
ID VOLUME SAMPLE
XXXXXX
Sample ID: SAMPLE xx
Power: xxx %
Temp (xxx): xx.x
Time: xx:xx
Volume: xxx
Sample: x
Wt: x.xxxxg
Input samples, press ENTER.
Entry: 01
ID VOLUME SAMPLE

CEM SMART System 5 Specifications

General

Brand	CEM
Model	SMART System 5
Category	Measuring Instruments
Language	English