Cerlic BB2 - 6 Unpacking the BB2 Control Box; Damages; Packaging; Content

- 5 -
6. Unpacking the BB2 control box
The unit has been tested and approved before delivery from the supplier. Please check
that no visible damages are apparent in this shipment.
DAMAGES
If damages occurred during shipment, immediately contact the shipping company and
the Cerlic representative. The shipment should be returned only after an return
authorization number has been issued by Cerlic or representative.
PACKAGING
The original packaging is designed to protect the equipment and should be used for
storage or if the product must be returned.
CONTENT
Please check that the content corresponds to your order and packing list.
OPTIONS AND ACCESSORIES
• Aluminum handrail mounting plate predrilled for BB2
or solenoid valves w/ u-bolts, outside US version P/N 10605533
• Aluminum handrail mounting plate predrilled for BB2
or solenoid valves w/ u-bolts, US version P/N 31204049
• 33 ft. (10m) cable for. Connection cable with plug-in. P/N 20805510
• Y-Splitter for two sensors to one BB2 control box P/N 21505534
• Solenoid valve for flushing P/N 11705516