8. Insert the batteries (see "Battery replacement" on
page42).
9. Using an authorised locking medium, check whether
the ILS-I INTERNAL DOOR HANDLE SET can read media. The
handle is functioning correctly when the LED of the
reader unit lights up green and the latchbolt is pulled
back when the lever handle is actuated.
When you hold the Battery Master in front of the
reading field, an event is generated that
automatically transfers the current date to the
CEStronics Suite (with offline devices, transfer
does not occur until a connection is made with the
RF-Stick).
The handle set is now fully mounted and ready for use.
Page 24 of 83 Wide shield replacement handle set ILS-I
5.4 ILS-I assembly
Overview: Use of master media Help & troubleshooting Technical data Maintenance & disposal
Operation
Administration Assembly Basic information
To Next Page
Loading...
