11.2 Authorising additional master media
Required:
l
System-Master (must be authorised for the locking device beforehand)
l
Master medium to be authorised
All master media must be authorised prior to their first use. Exception: RF-Ini-Master(in NET and VA devices) and RF-
Trace-Master.
Procedure:
Steps Signal
1. Hold the System-Master for roughly 1 second in the reading field of the locking device.
‘Authorisation mode’ has been started. 1x short green
2. Now you can authorise any number of master media in succession by holding each master
medium in the reading field of the locking device for about 1 second.
The master medium has been authorised. 1x short green after each mas-
ter medium
Wide shield replacement handle set ILS-I Page 57 of 83
11.2 Authorising additional master media
Overview: Use of master media
Help & troubleshooting
Technical data
Maintenance & disposal Operation Administration Assembly Basic information
To Next Page
Loading...
