11.1 Authorising the System-Master
Each locking device of an OMEGA FLEX system must initially be familiarised with the System-Master. This enables the System-
Master to authorise further master media for this locking device.
Each OMEGA FLEX system has only one System-Master. The system number stored in the locking device and the System-Master
ensures that only the System-Master assigned to a particular system can be authorised for the locking devices of that system.
For security reasons you should authorise the System-Master on all locking devices.
If you are using the CEStronics Suite:Ensure that the System-Master is read into the OMEGA Client. This ensures that
it is automatically authorised for a locking device during the initial reprogramming of the locking device.
Required:
l
System-Master
Procedure:
Wide shield replacement handle set ILS-I Page 55 of 83
11.1 Authorising the System-Master
Overview: Use of master media
Help & troubleshooting
Technical data
Maintenance & disposal Operation Administration Assembly Basic information
To Next Page
Loading...
