CEStronics CES OMEGA FLEX - Administration Via Wireless Online Network

6.5 Administration via wireless online network
6.5.1 About wireless online networks
A wireless online network establishes a permanent connection between locking devices and the OMEGA
Server. A wireless online network is created via Access-Points for which the transmission range can be
boosted using external antennas .
Device Maximum range
Access-Point 25 m
6.5.2 Principle of administration via wireless online network
Administration via wireless online network is implemented via a permanent online
connection. The administration is implemented centrally by the OMEGA Client, i.e. the
programming jobs are transmitted automatically via the wireless online network to
online locking devices.
Required administration devices and master media:
PC with OMEGA Client Access-Point(s)
System-Master RF-Ini-Master
(To activate online mode for the
NET locking devices, see "Online
mode" on page74.)
RF-Trace-Master
(To check the quality of the wire-
less connection, see "Checking the
quality of the wireless connection"
on page76.)
The basic procedure for administration via the wireless online network:
1. You set up a wireless online network via Access-Points. You can find detailed instructions in the
Access Point manual.
2. Import all of the required OMEGA FLEX components into the OMEGA Client. Detailed instructions
can be found in the CEStronics Suite Help.
3. Specify the locking authorisations, time profiles, etc. in the OMEGA Client. Detailed instructions can
be found in the CEStronics Suite Help.
4. The programming jobs are automatically transmitted to the online locking devices via the wireless
online network.
Wide shield replacement handle set ILS-I Page 35 of 83
6.5 Administration via wireless online network
Overview: Use of master media
Help & troubleshooting Technical data Maintenance & disposal Operation
Administration
Assembly Basic information