5.4 ILS-I assembly
The wide shield version of the ILS-I internal door handle set makes it possible to mount the handle set on
existing rosette holes or long shield or short shield holes.
5.4.1 Scope of delivery for ILS-I internal door handle set
1 1x internal door handle set with or without holes for Euro profile cylinders*
2 4x washers for M4 countersunk head screws
3 4x washers for M5 countersunk head screws**
4 4x threaded bolts M4
5 4x countersunk head screws M4
6 4x threaded bolts M5
7 4x countersunk head screws M5**
8 1x square spindle*
9 2x Energizer Ultimate Lithium 1.5V AA
* Version is dependent on the order. A counter handle can be ordered separately (not illustrated).
** Only included in orders without counter handle.
Wide shield replacement handle set ILS-I Page 19 of 83
5.4 ILS-I assembly
Overview: Use of master media Help & troubleshooting Technical data Maintenance & disposal
Operation
Administration Assembly Basic information
To Next Page
Loading...
