11.3 Deleting master media
Required:
l
System-Master
l
The master medium to be deleted
Deleting a Program-Masters will delete all authorisations that have been issued with this Program-Master.
The opening duration set with the Time-Master is retained even after the Time-Master is deleted
Procedure:
Steps Signal
1. Hold the System-Master in the reading field of the locking device for approx. 1 second.
‘Delete mode’ has been started. 1x short green
2. Now you can delete any number of master media in succession by holding each master
medium in the reading field of the locking device for about 5 seconds.
The master medium has been deleted. 2x short green after each mas-
ter medium
3. Hold the System-Master in the reading field of the locking device for approx. 1 second.
‘Delete mode’ has been terminated. 1x long green
Wide shield replacement handle set ILS-I Page 59 of 83
11.3 Deleting master media
Overview: Use of master media
Help & troubleshooting
Technical data
Maintenance & disposal Operation Administration Assembly Basic information
To Next Page
Loading...
