‘Delete mode’ is terminated automatically after approx. 5 seconds. The master
media previously held up to the reading field are deleted from the locking device.
All master media that were held in the reading field are now no longer authorised to
implement settings for this locking device.
Troubleshooting:
Signal Cause Solution
After step 2:
2x short red The master medium cannot be deleted
because it is not one of the master media that
requires authorisation.
RF-Ini-Masters(for NET and VA devices) and
RF-Trace-Masters do not need to be author-
ised and therefore cannot be deleted.
1x short green The master medium was held in the reading
field of the locking device for too short a time.
The authorisation has not been deleted.
Hold the master medium in the reading
field of the locking device for a longer time.
Page 60 of 83 Wide shield replacement handle set ILS-I
11.3 Deleting master media
Overview: Use of master media
Help & troubleshooting Technical data Maintenance & disposal Operation Administration Assembly Basic information
To Next Page
Loading...
