jobs to a locking device using an RF-Stick" on page78). The connection between the RF-Stick and lock-
ing device is then automatically disconnected.
6.4.3 Initialising an RF-Stick for the OMEGA Client
Required:
l
RF-Stick
l
PC with OMEGA Client installed
Procedure:
Steps
1. Insert the RF-Stick into a free USB socket of a PC on which OMEGA Client is installed.
The RF-Stick driver is installed automatically.
2. Start OMEGA Client and log in.
The RF-Stick is automatically detected by OMEGA Client. The bottom bar of OMEGA Client now displays ‘RF-Stick ready’.
The RF-Stick is now initialised.
Troubleshooting:
Problem Cause Solution
OMEGA Client indicates ‘RF-
Stick not authorised’.
The RF-Stick belongs to a different system and cannot
be used for the administration of your OMEGA FLEX
system.
Use an RF-Stick that has the sys-
tem number of your OMEGA FLEX
system.
Page 34 of 83 Wide shield replacement handle set ILS-I
6.4 Administration using the RF-Stick
Overview: Use of master media
Help & troubleshooting Technical data
Maintenance & disposal
Operation
Administration
Assembly Basic information
To Next Page
Loading...
