7.5.1 Signals after batteries are inserted
Signal Meaning
Start sequence for offline locking devices (no errors):
1x rot Bootloader is loading
1x green Firmware loaded successfully
Start sequence for online locking devices (no errors):
1x rot Bootloader is loading
Firmware is loading
1x green Firmware loaded successfully
1x green Device is online and connected to the Access-Point
Start sequence for online locking devices:
1x rot Bootloader is loading
Firmware is loading
1x green Firmware loaded successfully
1x rot Device is online but there is no connection to the Access-Point
Error in start sequence:
flashes red Firmware error
Perform a firmware update. If it is not possible to eliminate the error, please contact your
CEStronics partner.
If a system error is present, it will be displayed immediately after the start sequence.
Page 46 of 83 Wide shield replacement handle set ILS-I
7.5 Battery replacement
Overview: Use of master media
Help & troubleshooting Technical data
Maintenance & disposal
Operation Administration Assembly Basic information
To Next Page
Loading...
