block lists that contain the blocked locking media. Every time an authorisation is attempted, the following
occurs:
l
The locking device checks whether the locking medium is blocked. Only non-blocked locking media
are accepted.
l
If a locking medium is not blocked but it is on the block list, the locking device sends the information
to the locking medium indicating that this medium is blocked.
OMEGA Client has multiple ways of blocking a locking medium.
Detailed instructions can be found in the CEStronics Suite Help.
Wide shield replacement handle set ILS-I Page 51 of 83
9.2 Loss of a locking medium
Overview: Use of master media
Help & troubleshooting
Technical data
Maintenance & disposal Operation Administration Assembly Basic information
To Next Page
Loading...
