11.9.2 Deactivating online mode
Required:
l
RF-Ini-Master (does not requires prior authorisation to deactivate online mode)
Procedure:
Steps Signal
1. Hold the RF-Ini-Master in the reading field of the locking device for approx. two
seconds.
Online mode is now deactivated. 2x short green
2. Remove the RF-Ini-Master from the reading field.
Online mode is now deactivated.
Wide shield replacement handle set ILS-I Page 75 of 83
11.9 Online mode
Overview: Use of master media
Help & troubleshooting
Technical data
Maintenance & disposal Operation Administration Assembly Basic information