Chattanooga Intelect Mobile 2 User Manual


SETUP INSTRUCTIONS
EN
|
Intelect
®
Mobile 2 ELECTROTHERAPY User Manual
DEVICE CONNECTED TO THE MAINS
1. Plug the Power cord into the back of device. Plug the
other end of the cord into an electrical outlet.
NOTE: The Power Cord may be unplugged from the back of
the unit in an emergency situation.
2. Turn on the ON/OFF switch located on the back of the
device.
3. Select desired function on the Home Screen
DEVICE WORKING ON BATTERY
1. Press the ON/OFF button on the LCD Front panel, as
shown below
2. Select desired function on the Home Screen (shown
below).
ON/OFF Button
STOP TREATMENT AND TURN OFF THE
DEVICE
Press Play/pause button to pause treatment then press stop
on touch screen. If device is on mains power press the on/
o button on the front panel then turn o the switch on the
back of the unit.
If device is working on battery follow the above procedure
but to switch o only press the on/o button on the front
panel
PLAY/PAUSE button

Chattanooga Intelect Mobile 2 Specifications

General

Brand	Chattanooga
Model	Intelect Mobile 2
Category	Medical Equipment
Language	English