72
V-ACTOR HF HANDPIECE OPERATIONS, SET-UP, CLEANING, AND MAINTENANCE
EN
INTELECT
®
RPW 2 USER MANUAL
HANDPIECE
• Clean the coupling gel o the handpiece using a cleaning agent that is suitable for surface cleaning.
• Disinfect the handpiece with an alcohol-based disinfectant that is suitable for surface cleaning (follow the manufacturer's
instructions).
• Clean the vibration transmitters thoroughly after each use.
• The vibration transmitters can be cleaned using the usual cleaning agents and disinfectants after each use.
• As an alternative, you may clean the vibration transmitters each day in an ultrasonic bath.
Caution!
Cleaning agents and disinfectants may generate an explosive atmosphere.
Disconnect the handpiece from the control device before starting any cleaning or maintenance work.
Attention!
It is essential that no fluid be permitted to penetrate either the device or its tubing.
Attention!
The constituents listed here are non-binding examples. No claims are made regarding the
completeness of the list.
To Next Page
Loading...
