CHERY AUTOMOBILE CO., LTD Automatic Transmission Fault Diagnosis Manual
5.Loosen the fixing nut between
the oil feed pipe and the oil pan.
ssembly procedure:
pe and fix it
Install the connecting bolt at upper
raulic
fl
Remove the oil feed pipe.
A
1.Install the oil feed pi
with a fixing nut.
Tightening torque: 15Nm
2.
part of the oil feed pipe.
Tightening torque: 20Nm
3.Lower the vehicle;
4.Fill in the transmissions hyd
uid
5.Install the battery.
50
To Next Page
Loading...
