CHERY AUTOMOBILE CO., LTD Automatic Transmission Fault Diagnosis Manual
53
Oil pan and gasket
isassembly procedure:
Lift the vehicle
Drain off the hydraulic fluid
inside the transmission.
ote: Do not damage the contact
the removing the oil
n. Otherwise, it will cause oil
aking.
Loosen the oil pan’s
connecting bolt;
Take off the oil pan and
gasket.
Check whether there is me
particles, and foreign matters in en
make necessary repair.
ssembly procedure:
Install a new gasket;
Install the oil pan and fix it
ty of
e
Check the fluid level.
D
1.
2.
N
surface between the oil pan and
case when
pa
le
4.
5.
Check:
tal powder, cermet powder from the clutch’s surface, rubble
gine coolant on the oil filter screen and oil pan. If yes, find
out the reason and
A
1.
2.
with the connecting bolt;
Tightening torque: 10Nm
3. Lower the vehicle;
4. Fill in a suitable quanti
into thhydraulic fluid
transmission;
5.
To Next Page
Loading...
