CHERY AUTOMOBILE CO., LTD Automatic Transmission Fault Diagnosis Manual
54
Side cover and gasket
isassembly procedure:
Lift the vehicle;
. Remove the left front
whe
the
ssembly procedure:
Install a new gasket;
Install the side cover and
fix it with the connecting
bolts;
Tightening torque: 10Nm
Fill hydraulic fluid into the
transmission;
Lower the vehicle.
dometer drive gear case
isassembly procedure:
Take off the vehicle speed
sensor’s terminal;
Loosen the connecting bolt on
the odometer drive gear case
and take off the case.
D
1.
2
el and its drum;
3. Drain off the fluid in
transmission;
4. Loosen the side cover’s
connecting bolts;
5. Take off the side cover
and gasket.
A
1.
2.
3.
4.
O
D
1. Remove the battery’s negative
terminal;
2.
3.