CHERY AUTOMOBILE CO., LTD Automatic Transmission Fault Diagnosis Manual
6. Install the engine hanger
and lift the engine;
Remove the transmission
suspension;
Lift the vehicle;
Drain off the fluid;
. Remove the vehicle
11. ehicle;
. Remove the cooling
pipe;
. Loosen the bolt
connecting the
transmission’s left and
back suspension and the
transmission.
. Lift the vehicle;
. Remove the two front wheels;
. Remove the transmission’s drive shaft;
spension;
. Rotate the targeted wheel
so that all fixing bolts on
the converter could be
seen from the engine’s
side hole;
. Remove the converter’s
fixing bolts on the
targeted wheel.
7.
8.
9.
10
speed sensor’s terminal;
Lower the v
12
13
14
15
16
17. Remove the engine’s front su
18
19
64