CHERY AUTOMOBILE CO., LTD Automatic Transmission Fault Diagnosis Manual
20
65
. Lower the vehicle;
. Loosen the bolt connecting the
upper part of the converter case
and the engine;
Lift the vehicle;
24. e
lower part of the converter case
and the engine;
Remove the front suspension;
Remove the transmission
assembly.
1. ion assembly
while being supported with a
jack.
Install the bolt connecting the
converter with the engine.
Tightening torque: 75Nm
21
22.
23. Support one jack under the
transmission.
Loosen the bolt connecting th
25.
26.
Assembly procedure:
Install the transmiss
2.