Chery A11 2003 - Page 498

CHERY AUTOMOBILE CO., LTD Automatic Transmission Fault Diagnosis Manual
3. Remove the jack and lower
the vehicle;
Install the bolt connecting the
upper part of the converter with
the engine;
Tightening torque: 75Nm
Lift the vehicle;
Install the bolt connecting the
torque converter with the
targeted wheel. Rotate the
targeted when installing in
order to install all connecting
bolts.
Tightening torque: 45Nm
8.
front
suspension.
Plug on the vehicle speed
sensor’s terminals.
. Install the transmission’s drive
shaft;
. Install two front wheels;
. Lower the vehicle;
. Install the left back suspension;
. Remove the crane
. Install the oil cooling pipe;
. Install the throttle cable on the
throttle’s swing arm;
. Connect the neutral positioning
18.
19. hift cable and
the gearshift arm;
. Install the cooler’s top cover;
. Install the battery.
4.
5.
6.
7. Install the engine’s front seat.
Install the bolt connecting
transmission with the
9.
10
11
12
13
14
15
16
17
switch;
Install the gearshift cable;
Connect the gears
20
21
66